Portable cool tech criolipolisis slimming coolsculption fat freezing machine
Cryolipolysis procedure:
After an assessment of the dimensions and shape of the fatty bulge to be treated, an applicator of the appropriate size and curvature is chosen. The area of concern is marked to identify the site for applicator placement. A gel pad is placed to protect the skin. The applicator is applied and the bulge is vacuumed into the hollow of the applicator. The temperature inside the applicator drops, and as it does so, the area numbs. Patients sometimes experience discomfort from the vacuum's pull on their tissue, but this resolves within minutes, once the area is numb.
Patients typically watch TV, use their smart phone or read during the procedure. After the hour-long treatment, the vacuum turns off, the applicator is removed and the area is massaged, which may improve the final results.
| Power supply mode: | AC220V±10%,50HZ |
| AC110V±10% | 60HZ |
| Rated power: | 800W |
| Negative pressure: | 0-80Kpa |
| Cooling : | -10 to ~45℃ |
| temperature: | 5℃-40℃ |
| Machine size: | 62*46*170cm |
| Packing size: | 106*73*65cm |
| GW: | 56kg |
Most CoolSculpting (cryolipolysis) results are from using a large CoolSculpting (cryolipolysis) applicator on the treated area, but you may also run across a small applicator that can be used on areas like a double chin or areas that don't have a lot of body fat. Is there any benefit to getting a small applicator if you don't have the money for a large applicator or the entire setup for a cryolipolysis fat freezing machine?
While a small applicator can work better with some treatment areas, a large applicator can often be swapped out with a different applicator handle for easier fat removal while still keeping the controlled cooling required to trim down unwanted fat on the surrounding tissue. Because the treated area doesn't really benefit from a smaller amount of controlled cooling, a large CoolSculpting (cryolipolysis) applicator is still the ideal method to use on a fat layer.
The fat freezing treatment is less effective when using a small applicator since it can't reach the fat deposit underneath the skin, especially if there's a significant fat bulge in the way. Even if the cosmetic procedure manages to remove any excess fat, it will require more time and effort to work on the surrounding tissue compared to a large applicator. This can be an issue if the fat bulge is in a large area like the inner thigh or the abdomen.
Product Tags:
|
|
800W Cryolipolysis Machine RF Lipo Laser Cooling Sculpting Machine Images
|
